Design Rod Pocket Curtains

Author: | Categories: Curtain comments
Contemporary Roof Soffit

Rod pocket curtains – Crossing bars will reduce the amount of time you’ll have to clean blinds with reduction of the number of times that they manage to fabric. To open and close the blinds by pulling in material, you usually deal with on the spot and let the oil of the hands on the fabric. Over time, shaped oily stain in the shade. Cross bar offers cords open and close the curtains. Although system crossing bars make pinch pleated curtains, almost any Pocket curtain rods can be customized to work on the stem.

Measure the width of your curtain panel. Cut a piece of Ribbon platter for this measure. Platter tape is a band of material that has been stitched pleated bag. Sew 1/2 inch at the top of the curtain, together right side rod pocket. Ribbon pulls back the rod pocket curtains of platter. Platter tape PIN backwards from the curtain 1/2 inch from the top. PIN the edges of the tape at the bottom. Stitch in place.

Lay flat-back of the curtain. Install a fabric hook into the pocket of the platter tape. The first hook should be on the end panel. The hook does not penetrate the fabric. On the other hand, descends into the layers that make up the rod pocket curtains platter tape. It measures 4 inches and place another cloth hooks. They continue to be at the top of the curtain panel.

Comments are closed.