Fireplace Screens With Doors

Author: | Categories: Others comments
Ideals Fireplace Screens With Doors

Fireplace Screens With Doors -By installing a set of glass doors on your fireplace, you’ll not only improve your appearance but also provide a measure of security to keep flying embers and on your floor. You can also enjoy a fire in your fireplace screen obstructed by a conventional metal chain, while still getting the heat through the tempered glass. Tilt the whole glass door against a wall with the front side facing the wall. Place a protective cloth between the gates and the wall. Remove any door stops factory installed used for shipping purposes.
fireplace screens With doors Insert the four mounting brackets inside the whole door frame, two on top and two on the bottom with the hardware provided and tighten with clenched fingers. Some fireplace screens may have adjustable upper mounting brackets that must be mounted before being connected to the frame. Check the installation instructions that come with your screen.
Push the framework of fireplace screens With doors screen so that it is flush against the surface in front of the fireplace and have a helper hold it in place. Open doors and reach inside the top mounting brackets. Place each upper bracket to lintel metal top bar at the top of the fireplace opening grabs. Tighten all screws on the upper mounting brackets with adjustable wrench clockwise. Place the lower mounting brackets at the bottom of the screen until it lay on the floor inside the fireplace. Mark the mounting holes with a pencil and place brackets out of the way.

Comments are closed.